Pieps DSP Avalanche Transeiver

After the introduction to the market in 2003 the Pieps DSP quickly became the preferred beacon for backcountry skiers and rescue professionals. The Pieps DSP combines modern digital search technology with three antennas and a Digital Signal Processor to support the searcher in the most critical situations. Whether you are faced with single or multiple burial situations the Pieps DSP’s unique features make things easy and fast for the searcher.

Features

• Outstanding digital range all around in all directions
• Direction and distance indication from the start
• 3 Antennas allow exact pinpointing
• Search-strip width: 50 m (without turning and swivelling the DSP)
• iPROBE Support: DSP can be temporarily deactivated by the iPROBE
• Unique self check using a fourth antenna
• Frequency measurement checks the transmitting frequency
• Mark- and Scan-Function as additional support in multiple burial scenarios
• Update possibility to the latest firmware

MULTIPLE BURIALS: The absolute highlight of the Pieps DSP is based on signal separation by the Digital Signal Processor. Multiple signals are clearly displayed to the searcher on the display. Once the first victim is located press the MARK button, the next closest victim is now displayed on the beacon. After the introduction to the market in 2003 the Pieps DSP quickly became the preferred beacon for backcountry skiers and rescue professionals. The Pieps DSP combines modern digital search technology with three antennas and a Digital Signal Processor to support the searcher in the most critical situations. Whether you are faced with single or multiple burial situations the Pieps DSP’s unique features make things easy and fast for the searcher.

THREE ANTENNA SYSTEM: In 2003 Pieps introduced the first three antenna avalanche beacon on the market. Extremely accurate for locating victims no matter the position or depth of the buried victim. Three-dimensional searching eliminates the influence of inclined flux lines allowing exact pinpointing.

SCAN BUTTON: Used for multiple burial situations. Scan the surrounding area to display how many and how distant each victim is from the searcher’s beacon. The Pieps DSP is the first beacon to show you how many victims are buried. MARK

BUTTON: Once you locate the closest victim, use the mark button to isolate the signal and immediately begin searching for the next closest victim. Saves valuable time.

SMART TRANSMITTER: Pieps is the first beacon on the market with Smart Transmitter. The DSP will transmit its signal in-between the signal of a nearby beacon. No more overlapping signals!